Lightweight concrete SUPERBET 3



Manufacturing company: Termika DOO, Zrenjanin, Serbia

Type of the product: Thermal insulation materials

Product: Perlite concrete

Product composition: Expanded perlite, cement, additives

Code of the product: 6801009

Name of the product: SUPERBET 3

Usage of SUPERBET 3

SUPERBET 3 unites the good qualities of thermal insulation and tonnage. It can be used as a direct substrate for conventional flooring in bituminous coating or ceramic tiles in cement mortar.It is applied as a layer of thermal insulation of flat roofs. In his case it is obligatory to protect him, from the top side , with waterprofing insulation.

Preparation of the substrate

The surface must be clean, free of dust and grease. At the same time, it must be enough sufficient capacity to accommodate the load of the superstructure. The substrate must protect perlite concrete from moisture from the soil. This means that applications for ground floor space below insulation layers must contain a waterproof layer. If the surface is porous material, it must be wet before placing concrete.

Preparation of SUPERBET 3

Beg of Superbet 3 has been put in 100l blender stir into dry for about 1 minute and then we put 15-17 liters of water and stir for 4-5 minutes. The result of mixing the light weight foam concrete.

Installation of SUPERBET 3

Installation is done by spreading the concrete mass and smoothing with metal rails in the direction of the pre-prepared slides.Due to the possible occurrence of a temperature spread of hardened concrete, it is given the opportunity to the perimeter of the room leaving dilatation groove. In order to improve the adhesion is permitted, before applying the concrete, the surface smear grout.

Nursing of SUPERBET 3

After the concrete mass is foamy and soft, it must be protected 7 days against mechanical loads and rapid drying. Rapidly drying can be prevented by eliminating drafts in the concrete area, darkening the windows and external doors, covering the fresh concrete with nylon foil etc. It is also recommended that during the calum concrete dewy with water.

Installation conditions:

Temperature between +5°C - +30°C.

When preparing SUPERBET-3 in the mixer pour the entire number of bags, and do not add anything except water.


Document